VTech I6778 - Manual (Page 19)

www.vtechphones.com 16
Basic operation
• If the destination
handset does
not pick up the
intercom call,
the originating
handset can
return to the
external call by
pressing
/FLASH, or
OFF/CLEAR.
• If a call remains
on hold for about
100 seconds,
the screen of
the originating
handset shows
UNABLE TO
CALL. TRY
AGAIN and
reconnects to
the external call
automatically.
The destination
handset returns
to idle mode.
• To answer the intercom call on the handset, press / FLASH,
/SPEAKER, INT or any dialing keys (0-9,#,*) on the handset.
• To end an intercom call, press INT, OFF/CLEAR, or place the handset
back in the telephone base or charger.
Conference call
You can conference up to two registered handsets on an external line. If
one handset is on the line, press /FLASH or /SPEAKER on another
handset to join the call.
Transfer an external call
This telephone allows you to transfer an external call from one handset to
any other handset.
• During a call, press
INT to put the call on hold at the originating handset.
The screen will display TRANSFER TO:
• Use the keypad to select the number of the destination handset, and the
screen will display CALLING HANDSET X.
• The destination handset will ring and the screen displays HANDSET X
IS CALLING.
• To answer the call at the destination handset, press /FLASH,
/SPEAKER, INT or any dialpad keys (0-9, #, *) on the destination
handset.
• Now the party at the originating handset can have a conversation with the
party at the destination handset, and the screen displays INTERCOM.
• Press OFF/CLEAR on the originating handset to transfer the call.
TRANSFER TO:
INTERCOM