VTech I6778 - Manual (Page 25)

www.vtechphones.com 22
Advanced operation
• Due to regional
service
differences,
the caller ID
information
may not be
available for
every incoming
call. In addition,
the callers may
intentionally
block their name
and/or telephone
number.
• The time of all
handsets is
automatically set
and updated with
incoming caller ID
information if you
subscribe to this
service.
CALL LOG EMPTY
>CALL LOG
RINGER VOLUME
A. PERSON
595-9511
3:45 AM 1/02
The call log can be accessed on the handset by pressing CID, or pressing
the center NavKey then CALL LOG, then press the center NavKey
again. If the telephone number of caller ID matches the exact telephone
number in the directory, the name of the entry will be shown, otherwise,
the name will be shown as delivered by the telephone company.
Review the call log
• When in the call log, use the up or down NavKey or to scroll
through the call log on the handset.
• The name, number, date and time of all incoming calls are displayed
on the screen.
There will be an error tone when the list reaches the top or the end
of the call log.
Make CID entries ready to dial
Although the call log entries you receive are 10 digits, (the area plus the
7-digit number,) in some areas, you may need to dial only the seven
digits, or a 1 plus the seven digits, or a 1 plus the area code plus the
seven digits. You can change the number of digits that you dial or store
from the call log.
While reviewing the call log, press # repeatedly to display these dialing
options for local and long distance numbers before dialing or saving the
telephone number. See an example at right.
•
Call log (continued)
595-5911
1-595-5911
800-595-5911
1-800-595-5911