Vizio VO42LF - Manual (Page 20)

VIZIO VO42L FHDTV10A User Manual
Version 2/27/2008 20
www.VIZIO.com
2.4 2.4 2.4 2.4 Connecting Your Connecting Your Connecting Your Connecting Your Basic Set Basic Set Basic Set Basic Set- - - -Top Box Top Box Top Box Top Box
2.4.1 2.4.1 2.4.1 2.4.1 Using Composite Video Using Composite Video Using Composite Video Using Composite Video
1. Turn off the power to the HDTV and
Set-Top Box.
2. Using the AV Cable, connect the
Video (yellow color) connector on
your
Set-Top Box to the
corresponding Video (yellow color)
connector in the AV 1/S-Video
group (yellow/red color area) at the
rear of the HDTV.
3. Using the white and red connectors, connect the cable to the audio output connectors
associated with the Video output on your Set-Top Box and connect the other end to the audio
connectors associated with the AV 1/S-Video input (yellow/red color area) at the rear of the
HDTV.
4. Turn on the power to the HDTV and Set-Top Box.
5. Select AV 1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
2.4.2 2.4.2 2.4.2 2.4.2 Using Coax (RF) Using Coax (RF) Using Coax (RF) Using Coax (RF)
1. Turn off the power to the HDTV and Set-Top Box.
2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your
Set Top Box and the other end to the DTV/TV input at the rear of the
HDTV.
3. Turn on the power to the HDTV and Set-Top Box.
4. Select TV using the INPUT button on the remote or side of the
HDTV, or directly by pressing the TV button on the Remote Control.
5. The most common channels; in which your TV must be at, are either channel 3 or channel 4.
Please contact your signal provider to verify what channel the TV must be at.
Note: Refer to your Set Top Box user manual for more information
about selecting the video or RF output of the product.