7 sharpness sharpness sharpness sharpness – Vizio VO42LF User Manual
Page 41
VIZIO VO42L FHDTV10A User Manual
Version 2/27/2008
41
www.VIZIO.com
Use the
or
button to adjust the level.
The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for
a realistic appearance. In most cases, the default middle position is correct. If people’s faces look too
orange try reducing the level of color first as the case of this is often too much color.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.2.7
4.2.7
4.2.7
4.2.7
Sharpness
Sharpness
Sharpness
Sharpness
Press the
button to highlight the Sharpness selection.
Press the
button to start adjusting the sharpness and the menu page will disappear and be replaced
by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and
maximum available levels. Use the
or
button to adjust the level.
The Sharpness adjusts the sharpness of the picture.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.2.8
4.2.8
4.2.8
4.2.8
Advanced Video Features
Advanced Video Features
Advanced Video Features
Advanced Video Features
Press the
button to highlight the option for
Advanced Video selection and press either the
button to select it. A new menu will be
displayed showing the advanced functions
available for fine tuning of the picture.
Noise Reduction (SNR)
Press the
button to highlight Smart Noise
Reduction (SNR). Use this feature to diminish
picture artifacts caused by the digitizing of
image motion content that may be present in the
picture. Press the
or
button to choose
from the Off, Low, Medium or Strong setting.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
Color Enhancement
Press the
button to highlight Smart Color Enhancement. Use this feature to increase the picture
reproduction performance of the picture.
Press the
or
button to choose from Off, Normal, Rich Color, Green/Flesh and Green/Blue setting.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.