VTech 2432 - Manual (Page 28)

28
Press the VOL key, located directly
below the lower left corner of the
display.
Use the keys directly below the /
symbols on the display to raise or
lower the Handset volume. Notice the
change in the display graph as you
adjust the volume. An increase in
volume will be represented by an
increase in shaded area on the graph.
A decrease in volume will result in a
reduction of the shaded area.
Press the OK key (top, center) to
confirm your adjustment.
Handset and Base Operation
How to adjust the Handset Volume ( also applies to the Handset Speakerphone)
NOTE: The Handset must be IN USE to adjust the volume
/
Intercom/Transfer Function
Press INTERCOM/TRANSFER on the
Handset or Base registered to your
2-Line 20-2432 system, or the Base
Unit.
The screen will display your options,
for example:
BASE 0
HANDSET 1 1
GLOBAL PAGE
*
Base Speakerphone or Headset
Volume
During an active call simply press the
Volume UP or DOWN keys to adjust
the Speakerphone or Headset volume
.
When reach the maximum or the
minimum, a triple beep sounds.
•
•
•
•
Advanced Operations