VTech 2432 - Manual (Page 30)

30
Handset and Base Operation
Line in Use Indication
Active (off-hook) Handset:
During a call, the Handset/Base screen
will display, in the upper left corner, the
LINE icon(s) and the HANDSET/BASE
number.
Low Battery Indication
When a low battery is detected, the Battery icon will flash and a warning beep
is played. The status message LOW BATTERY will also be displayed when
the Handset is in idle mode. To prevent an unexpected call drop, a drained
Handset battery should be replaced by a fully charged spare battery.
When both lines are in use at the same time, the L_EXTENSION IN USE
message will alternate between 1 and 2.
Switching from the Handset Earpiece to Handsfree
While on a call using the Handset earpiece, press HANDSFREE on the lower
left portion of the Handset.
To return to the Handset earpiece, press HANDSFREE again.
Base Speakerphone Operation
The Base of your 20-2432 is equipped with a duplex Speakerphone. This
is a very useful feature for handsfree conversations or conference calls at
the base unit. For more information, refer to MAKING CALLS in HANDSET AND
BASE OPERATION.
Idle (on-hook)Base Unit:
During a call, the idle Base screen will
display, in the upper left corner, the LINE
icon(s) and the HANDSET number
currently in use.
Idle (on-hook) Handset:
During a call, the idle Handset will
display:
When one or both lines are currently
in use by a parallel set (a telephone
device other than your 20-2432
system), the Handset and Base will
display:
Advanced Operations