VTech VT2625 - Manual (Page 11)

10
Call Forward
• A Handset (HS1), on an external call
can forward it to the other Handset
(HS2), by pressing and holding the
INTERCOM key. The display of HS1
will initially show:
• HS2 can Press ON, SPEAKERPHONE
or any dialing keys to answer the call.
NOTE: If HS2 does not respond in about
30 seconds, the external call will be
returned to HS1 and the display will
show CALL BACK:
If the returned call is not answered
within 30 seconds, the external call will
end automatically.
CALL BACK
CALL FORWARDED
Call Transfer
• A Handset (HS1), on an external call can transfer it to the other Handset (HS2),
by pressing the INTERCOM key.
NOTE: The external call is put on hold automatically.
• HS2 will ring, showing an intercom call.
• HS2 can answer the intercom call by pressing ON.
These two handsets (HS1 and HS2) can discuss the external call.
• When HS1 presses OFF, the external call is then transferred to HS2. CALL
TRANSFERRED will briefly display on HS1.
NOTE: If there is no answer on HS2, then HS1 can be reconnected to the held
call by pressing ON to reconnect to the external call.
Conference Call
It is possible to establish a conference
between two Handsets and the exter-
nal line.
If a Handset already has a connec-
tion to the external line, and the other
Handset presses ON or SPEAKER-
PHONE, a conference is immediately
established. Both Handsets will show:
CONF. 00:00:25
Handset Operation
Basic Operation