VTech VT2625 - Manual (Page 23)

22
Your cordless telephone is equipped with a 2.5mm Headset Jack for use with an
optional accessory Headset for hands-free operation. If you choose to use the Headset
option, you must obtain an optional accessory Headset, which is compatible with this
product.
To purchase a Headset, call VTECH Customer Service at 852-2776 3223.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the Handset.
Connect the plug on the Headset cord to the jack (under a small rubber flap) on the
cordless Handset. The plug should fit securely. Do not force the connection.
Headset Operation
NOTE:
•
Whenever a compatible Headset is
connected to the cordless Handset,
the microphone on the Handset will
be muted. This is done to limit the effect
of background noise.
• When a compatible Headset is
connected to the cordless Handset,
your Speakerphone feature will be
disabled. To use your Speakerphone
feature, simply disconnect the
Headset from the Handset.
Belt Clip
The phone is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches
on the sides of the Handset. The belt clip
should snap securely into place. Do not
force the connection.
Advanced Operation