VDO Dayton TR 7327 B - Manual (Page 22)

23
Eng
lish
ton longer then 6 seconds.
Paired Devices
This headunit is able to store up to fi ve Blue-
tooth-enabled devices (consisting of a mixture
of mobile phones or music-players). If a new
device starts pairing, it will replace the device
that was used longest ago.
Hands-Free Phone Call
Answer a call
You will hear the ring tone from the in-car
speaker. However this feature is depending on
phone being used.
Note: All the actions explained below can also
be executed via the remote control.
To answer the phone call, simply press the
button.
During a phone call, pressing the same but-
ton will transfer the phone call to the mobile
phone.
Note: This function is depending on the mobile
phone.
Reject a call
If you do not wish to answer the incoming
call, simply press the button.
Hang-up a phone call
After you have fi nished the phone call,
and you wish to hang-up, simply press the
button.
Music Streaming
If your Bluetooth-enabled music device has
already been paired with this headunit before,
simply turn on the Bluetooth function of your
music device and the headunit will react accord-
ingly.
Note: This feature is depending on the phone
being used. Please check the documentation
delivered with your mobile phone.
AUX operation
This headunit comes with an Auxiliary input (3.5
mm jack) on the front for ease of streaming your
music from your portable devices.
Insert your 3.5 mm plug (connected to your
portable device) into the front Aux input.
Short-press the button a few times until
the display shows 'AUX'.
1.
2.
Play your portable device.
Display mode
The set allows you to view different kind of infor-
mation while listening to the radio or media.
Short press "DISP" button (4) in the desired
mode to change displayed information as
mentioned in the table below.
Tuner SD card, USB,
AUX Bluetooth
Station Name Track time Call informa-
tion/Time
Frequency Clock Clock
RDS Clock Album ID3 Caller ID for
BT Hands
free
PTY Artist ID3 Name of
the Device:
A2DP
Title ID3
SPECIAL FUNCTIONS
Clock
You can select automatic update of the clock
via the RDS radio signal or manually adjust the
clock yourself. The clock will be displayed when
the headunit is powered-off. In case you need
to save battery life, you may turn off the clock
display too.
Navigate the SAM to select ‘CLOCK’.
Turn the knob clockwise / counter-clockwise
to select the type of clock functions (RDS
clock, manual clock or clock off).
Note: If you select ‘CLOCK ON’, the menu item
‘CLOCKSET’ is selectable as the next menu
item.
Refer to the ‘SOFTWARE ACCESS MENU
3.
1.
1.
2.