Vivotek IP2121 - Manual (Page 28)

- 26 -
Now the connection is ready to use for null
modem. Double click the newly setup
connection. A dialing information window
will pop up. Enter “root” as user name and
the serial number labeled on the bottom side
of the box as the password and click on
. Notice that the letters in the serial
number should be capital form. For example,
type 'A' instead of 'a'. After some negotiation
prompts, a connection status window will
show the speed is 115200 bps.
After connection is established successfully, go to the next section, First access to
Network Camera.
If an error message indicates a hardware error while connecting for the first time,
especially in Microsoft Windows 2000 environment, try again to recovery the possible
detection failure.