First access to network camera in modem mode – Vivotek IP2121 User Manual
Page 30
- 28 -
First access to Network Camera in modem mode
If the dial-out is not prohibited and the attached modem is recognized, Network Camera
will send out the system startup log and connection log by email or FTP according to
user’s settings as soon as the system is ready. That can be used to verify if the settings
work. Then Network Camera will always wait for someone to dial in. To dial in Network
Camera, setup a connection in dialup network on PC where the phone number is the
phone line of Network Camera. After connecting successfully, start the Web browser and
connect to “http://200.1.1.1”. In this case, Network Camera runs as a dial-up server and
assigns the IP address of “200.1.1.100” to the PC at the other end. While seeing the
authentication message window, type “root” as user name and the serial number of
Network Camera as the initial password. The point-to-point connection allows users
connecting Network Camera for surveillance at any time.
If the administrator has setup some conditions in the application Web page or the script
file, Network Camera will automatically dial out based on the administrator's
configuration. Refer to the Application section in the Chapter Definitions of Configuration
for special security applications.