VTech I6717 - Manual (Page 23)

www.vtechphones.com 20
Advanced operation
• Due to regional
service
differences,
the caller ID
information
may not be
available for
every incoming
call. In addition,
the callers may
intentionally
block their name
and/or telephone
number.
• The time of
the handset is
automatically set
and updated with
incoming caller ID
information if you
subscribe to this
service.
CALL LOG EMPTY
>CALL LOG
RINGER VOLUME
A. PERSON
595-9511
3:45 AM 1/02
HANDSET x
XX MISSED CALLS
Caller ID
If you subscribe to caller ID service, information about each caller will be
displayed after the first or second ring. This information will be stored in
the call log.
• The call log can store up to 50 entries.
• You can review, redial, and copy the entry into the directory.
• Entries are displayed in reverse chronological order, from the newest to
the oldest entry.
• When the call log is full, the oldest entry is deleted to make room for new
incoming call information.
• XX MISSED CALL and the NEW icon will be displayed on screen if there
are new call log entries (including missed and un-reviewed calls.)
• CALL LOG EMPTY will be displayed on screen if there are no call log
entries.
The call log can be accessed on the handset by pressing CID, or pressing
the center NavKey then CALL LOG, then press the center NavKey
again. If the telephone number of caller ID matches the exact telephone
number in the directory, the name of the entry will be shown, otherwise, the
name will be shown as delivered by the telephone company.
Review the call log
• When in the call log, use the up or down NavKey or to scroll through
the call log on the handset.
• The name, number, date and time of all incoming calls are displayed on
the screen.
There will be an error tone when the list reaches the top or the end of
the call log.
•