VTech ia5882 - Manual (Page 32)

www.vtechphones.com 29
B
as
ic
o
pe
ra
tio
n
Answering system operation
Audible indicators
Your telephone system gives you voice prompts for feature operations and voice confirmations when
you press a button or complete an operation
Setting the clock
1 Make sure the answering system is on
2 Press
CLOCK The system announces the clock setting (e g day, time and year), then announces:
“To set the clock, press CLOCK.”
3 Press CLOCK The system announces the current day
4 Press SKIP or REPEAT until the system announces the correct day, then press CLOCK The
system announces the current hour
5 Press SKIP or REPEAT until the system announces the correct hour, then press CLOCK The
system announces the current minute
6 Press SKIP or REPEAT until the system announces the correct minute, then press CLOCK The
system announces the current year
7 Press SKIP or REPEAT until the system announces the correct year, press CLOCK The system
announces the current clock setting and exits the clock menu
• If you have caller
ID service the
clock will be set
automatically with
incoming calls, but
you will need to
make sure the year
is correct You can
also set the clock
manually
• To advance
or recede the
minutes or year
by increments or
decrements of ten,
press and hold
SKIP or REPEAT
• Press and hold
CLOCK for about
two seconds to exit
clock setting at any
stage and the new
setting will be saved
and announced