VTech i 5881 - Manual (Page 38)

38
Answering System Operation
Answering System Operation
the system announce the feature you want to set. Refer to the Feature
Summary chart below for a description of the features and your choices.
3 Press CHANGE to hear the current setting. Continue to press CHANGE
to adjust the current setting.
4 Press TIME/SET to confirm your setting.
5 Press MENU to move on to the next feature, or press a MAILBOX key to
exit Feature Setup.
Use the 4-Way Multi-Function Selector to program the following features. For
more information about this selector, see page 36.
SYSTEM ANNOUNCES: DESCRIPTION/DIRECTIONS:
ì Set Security codeî
50*
Set the remote access code you will use
to access features and functions of the
answering system from a touch tone
phone. The code can be changed to any
two-digit number from 40–99.
ìSet Audible Message Alertî
Off*
On
When Message Alert is turned ON, the base
beeps once every 10 seconds when new
messages have been received.
ìSet Announce Onlyî
Off*
On When you turn Announce Only ON, callers
hear your announcement, but cannot leave
a message.
ìSet Call Screeningî
Off
On*
When you turn Call Screening OFF, you will
not hear incoming messages as the caller
leaves them.
ìSet Number of Ringsî
2
4*
6
Toll Saver Choose how many times the phone will ring
before the system answers a call. With Toll
Saver active, the system answers after two
rings when you have new messages and
after four rings when you have no new
messages.
• NOTE: Exit Feature Setup at any time by pressing a MAILBOX button.
FEATURE SUMMARY Default settings indicated by * .