VTech i 5881 - Manual (Page 41)

41
WINDOW DISPLAYS: WHEN:
0 No messages in any mailbox
1 - 9 8 In idle mode, the total number of messages/
memos in all mailboxes.
During message playback, the order number
of the message being played.
0 - 9 9 < - > F Memory is full, or total number of messages
is 99.
Counting 1 to 9 9 Duration(in seconds) of announcement or memo
recording
9 9 , flashing Length of recording is more than 99 seconds.
1 - 8 , steadily for Indicates volume level selected when
one second VOLUME or VOLUME is pressed
4 0 - 9 9 Current Remote Access Code (40–99)while
setting
A Announce Only mode
O n or O F , steadily for Displayed when any setting is changed
one second from on or off
C L < - > normal display Day and Time need to be set
_ _ System is answering a call or is in remote
operation
_ _ , flashing System is in programming mode or initializing
Answering System Operation
MESSAGE WINDOW DISPLAY
Connect with the Answering System from a Remote Location
You can access many features of this system remotely from a touch tone phone.
1 Dial your telephone number.
2 When the system answers, enter your Remote Access Code (preset to 50).
The system beeps once and then announces the number of new messages.
3 Enter a remote command (see “Remote Access Commands” on page 42).
4 Press *0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation.
Press *5 to hear the menu while remotely connected to the answering system.
Answering System Operation