Vincent Audio SV-234 - Manual (Page 30)

3 30 0 Vincent
B BU UTTTTO ON NS S O OFF TTH HE E R RE EM MO OTTE E C CO ON NTTR RO OLL
17. MUTE
Pressing this button once mutes the sound of the
loudspeakers (9), the preamplifier output "PRE OUT-
PUT" (14) and the recording output "REC OUTPUT"
(13). Pressing it again returns to the original volu-
me. The Mute function is not available if the input
"LINE5 MAIN INPUT" (11) has been selected for
playback.
18. Input Selector Buttons
These buttons are used to select one of the stereo
audio devices connected to the amplifier’s source
inputs for playback.
19. LEVEL and LEVEL : Volume keys
These buttons change the amplifier’s volume setting
for loudspeakers and the preamplifier output "PRE
OUTPUT" (14). This volume setting can not be made
if the input "LINE5 MAIN INPUT" (11) has been
selected for playback.
20. GAIN: Push button for -8dB attenuation
of Loudspeaker signals
With the activation of this function, the output signal
for the power amplifier (14) and speakers (9) is redu-
ced by 8 dB and thus the volume of the attached
speakers. It should only be activated if even at low
volume settings the volume is already very high.
21. BAL L and BAL R
Both keys can be used for changing the volume dif-
ference between right and left speaker if that is desi-
red. That is not possible for the source device con-
nected to "LINE5 MAIN INPUT".
1 17 7
1 19 9
2 20 0
2 21 1
1 18 8