SINBO SCO 5023 - Manual (Page 10)

- 9 -
ENGLISH
SINBO SCO 5023 CONVECTION OVEN
INSTRUCTION MANUAL
INTRO
THE DEAR BUYER!
Congratulations. You made a good choice!
You became the owner of production, which offers progressive design and high quality.
For full and safely usage of the given device, please, closely read the instruction manual.
IMPORTANT SAFEGUARDS
When using electrical appliances. basic safety precautions should always be followed
including the following:
1. Read all instructions before operating.
2. Do not touch hot surfaces. Use handles or knobs.
3. Remove all packaging plastics and other materials from unit before operating.
4. Wash all removable accessories before using for the first time.
5. Unit should be turned on to MAX temperature for 10 minutes for the first time to burn
off any access manufacturing or packaging oils.
6. To protect against electrical shock, do not immerse cord, plug or appliance itself in
water or other liquids.
7. Close supervision is necessary when appliance is used by or near children.
8. Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts.
9. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return the appliance to the nearest
authorized service facility for examination, repair or adjustment.
10. The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries.
11. Do not use outdoors.
12. Do not let cord hang over edge of table or counter or touch hot surfaces.
13. Do not place on or near a hot gas or electric burner. or in a heated oven.
14. Always attach plug to appliance first, then plug cord into wall outlet
To disconnect, turn any control to OFF position, then remove plug from wall outlet.
15. Oversized foods or metal utensils must not be inserted in the appliance as they may
cause a fire or risk of electrical shock.
16. A fire may occur if the appliance is covered or touching flammable material including
curtains, draperies, walls and the like when in operation.
17. Do not clean with metal scouring pads. Pieces can break off the pad and touch
electrical parts, involving a risk of electrical shock.
18. Place the appliance on a heat resistance surface.
19. Minimum distance between appliance and the surrounding objects must not be less
than 20 cm.