6 connecting an external receiver/amp, Optical output of audio received with hd programs – Vizio SV470XVT1A User Manual
Page 29
VIZIO SV470XVT1A User Manual
Version 6/2/2008
29
www.VIZIO.com
2.6
Connecting an external Receiver/Amp
1.
Turn off the power to the LCD HDTV and Receiver/Amp.
2.
Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the ANALOG OUT (white area)
audio connectors at the rear of the LCD HDTV.
3.
Turn on the power to the LCD HDTV and Receiver/Amp.
4. Then
press
the
MENU button on the remote control to open
the On-Screen Display (OSD) menu.
5. Press
▼
button on the remote control to select the Audio
menu.
6. Press
on the remote control to select SPEAKERS.
7. Press
►
on the remote control to select OFF so that the
sound from the LCD HDTV will now be routed through your
Receiver/Amp system.
2.6.1
Optical Output of Audio received with HD
Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical
DIGITAL AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving audio with
the programs being viewed no matter what input is being used.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.