Vizio SV470XVT1A - Manual (Page 47)

VIZIO SV470XVT1A User Manual
Version 6/2/2008 47
www.VIZIO.com
4.3.4
Digital Audio Out
This feature uses the SPDIF (Optical connector) audio signal to be used
through Home Theatre system.
Press the ▼ button to highlight the Digital Audio Out selection.
Press the ◄ or ► button to make the proper selection. The options are OFF,
Dolby Digital and PCM.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.3.5
Speakers
Press the ▼ button to highlight the Speakers selection.
Press either ◄ or ► button to turn the internal speakers On or Off. You may
want to turn-off the internal speakers when listening to the audio through your
Home Theatre System.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
4.3.6
Analog Audio Out
When using the RCA (white and red) connectors as audio line out to connect a stereo system.
Press the ▼ button to highlight the Analog Audio Out selection.
Press either ◄ or ► button to turn the audio out signal to Fixed or Variable. When it is set to variable,
volume from the external speakers will change according to the volume setting on the TV. If it is fixed, the
volume can only be changed by the settings on the external stereo system.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
4.3.7
Lip Sync
Included with the advanced technology of your TV, a feature which will
compensate the shortcomings of signal transmission called audio sync (Lip
Sync). Lip Sync is designed to adjust the audio of the program being viewed
so that it matches the movement of the lips of someone talking on the screen.
This feature is built into your set, and it can be applied to all inputs. To use
this feature, follow the steps below.
Press the MENU key to bring up the OSD.
Press either ▼ or ▲ button to scroll either up or down to Lip Sync.
Press either ◄ or ► button to make the appropriated adjustment.
Press either the MENU key once to return to the previous screen or the EXIT
key to return to your program if task has been completed.