VTech 5808 - Manual (Page 42)

42
Advanced Operations
Mute Function
During an active call pressing either the MUTE softkey on the
handset or base (when in speakerphone mode), will disable
the microphone. Press UNMUTE to return to normal two-
way conversation.
Hold Function
From the handset:
•
Press the HOLD softkey to place a call on hold. To return
to the call, press the
/FLASH (on) key.
NOTE: The handset will display Call on Hold when a call is
placed on hold. A
will flash to remind you a call is on
hold. If a call remains on hold for one minute, your i 5858
handset will ring to remind you the call is being held. The
phone will display Call on Hold Ringback! You have 30
seconds to return to the call before it is dropped.
From the base:
•
During an active call, press the HOLD softkey to place a
call on hold. The SPEAKERPHONE LED will flash to indicate
a call is on hold.
• To return to the call, press SPEAKERPHONE.
NOTE: If a call remains on hold for one minute, your 5858
base will ring to remind you the call is being held. The phone
will display CALL ON HOLD RING BACK! You have 30
seconds to return to the call before it is dropped.
Flash Function
You can use your phone with services such as call waiting.
Simply press the
/FLASH (on) key on the handset or the
FLASH key on the base (when in speakerphone mode) to
flash the line.
NATURAL - No frequency
enhancement. (Your handset is
preset to this selection)
.
NOTE: The sound select feature cannot be used when
in speakerphone or headset mode.
MUTE HOLD
Handset and Base Operation
MUTE HOLD
Natural
Sound Select
800-595-9511