VTech 5808 - Manual (Page 48)

48
Additional Information
In Case Of Difficulty
You hear noise in the handset, and none of the keys or buttons work
• Make sure the power cord is plugged in.
Common cure for electronic equipment
If the unit does not seem to be responding normally, then try putting the handset in the
charger. If it does not seem to respond, do the following (in the order listed):
1. Disconnect the power to the base.
2. Disconnect the handset batteries, and spare batteries, and spare battery cells, if applicable.
3. Wait a few minutes.
4. Connect power to the base.
5. Re-install the batteries.
6. Wait for the handset to re-establish its link with the base. To be safe, allow up to
one minute for this to take place.