VTech IA5864 - Manual (Page 9)

www.vtechphones.com 9 GETTING STARTED
G
ett
in
g S
ta
rte
d
Installation
Set Handset Date and Time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press or until DATE/TIME is displayed. Press SELECT.
• The month is flashing. Press or until the screen displays the correct month. Press SELECT.
• The day is flashing. Press or until the screen displays the correct day. Press SELECT.
• The hour is flashing. Press or until the screen displays the correct hour. Press SELECT.
• The minute is flashing. Press or until the screen displays the correct minute. Press
SELECT.
• AM or PM is flashing. Press or to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
1. With the handset in idle (off) mode, press PROG.
2. Press or until the screen displays RINGER: and current setting.
3. Press SELECT. The current setting blinks, and you will hear a sample of the ring.
4. Press or to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
5. Press SELECT to choose the displayed ringer setting.
• In the event of a
power outage, or
if your phone’s
power cord is
unplugged, the
time setting will be
lost.