Vizio E3D420VX - Manual (Page 25)

16
5
E3D320VX / E3D420VX / E3D470VX
Adjusting the Picture Size and Position
When displaying an image from the HDMI or RGB input, the size and position of
the display image can be adjusted.
To adjust the picture size and position:
1. Ensure the input is set to HDMI or
RGB.
2. From the Picture Settings menu, use
the Arrow buttons on the remote to
highlight More, then press OK.
3. Use the Arrow buttons on the remote
to highlight Size & Position, then
press OK. The Size & Position menu is
displayed.
4. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press
Left/Right Arrow to change the
setting:
• Auto Adjust - Automatically
adjusts display image to optimal
size and position. (RGB input only.)
• Horiz. Position - Adjusts the
horizontal (left/right) position of the
display image.
• Vertical Position - Adjusts the vertical (up/down) position of the
display image.
• Horizontal Size - Adjusts the width of the display image.
• Vertical Size - Adjusts the height of the display image.
• Fine Tune - Adjusts the height of the display image. (RGB input only.)
5. When you have finished adjusting the color temperature, press the EXIT
button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature will change the “warmness” or “coolness” of the
white areas of the picture.
To adjust the color temperature:
1. From the Picture Settings Menu, use
the Arrow buttons to highlight More,
then press OK.
2. Use the Arrow buttons on the remote
to highlight Color Temperature, then
press OK. The Color Temperature
menu is displayed.
3. Use the Arrow buttons on the remote
to highlight Color Temperature, then
use the Left/Right Arrow buttons to
change the color temperature preset:
• Normal is optimized for television
viewing.
• Cool produces a blue-hued
picture.
• Computer optimizes the picture
for use as a PC monitor.
• Custom allows you to manually change each of the color temperature
settings:
Red/Green/Blue Gain - Adjusts the amount of each color in the
display.
Red/Green/Blue Offset - Adjusts the position of each color in the
display.
4. If you want to reset the color temperatures to the factory default settings,
highlight Reset Color Temperature and press OK.
5. When you have finished adjusting the color temperature, press the EXIT
button on the remote.