Vizio E3D420VX - Manual (Page 26)

5
17
E3D320VX / E3D420VX / E3D470VX
Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
1. From the Picture Settings menu, use
the Arrow buttons on the remote to
highlight More, then press OK.
2. Use the Arrow buttons on the remote
to highlight Advanced Picture, then
press OK. The Advanced Picture menu
is displayed.
3. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press
Left/Right Arrow to change the
setting:
• Noise Reduction - Diminishes
artifacts in the image caused by
the digitizing of image motion
content. Select Off, Low, Medium,
or High.
• Color Enhancement - Reduces
oversaturation of some colors and
improves flesh tones. Select Off,
Normal, Rich Color, Green/Flesh, and Green/Blue.
• Adaptive Luma - Adjusts the average brightness of the picture to
compensate for large areas of brightness. Select Off, Low, Medium,
Strong, or Extend.
• Film Mode - Optimizes the picture for watching film. Select Auto or Off.
• Backlight Control - Select Off, DCR (Dynamic Contrast Ratio), or OPC.
• Ambient Light Sensor - The ambient light sensor detects the light
levels in the room and automatically adjusts the backlight for the best
picture. Select On or Off.
4. When you have finished adjusting the Advanced Picture Settings, press the
EXIT button on the remote.
Resetting the Picture Settings
To reset the picture settings to the factory default settings:
1. From the Picture Settings menu, use the Arrow buttons to highlight More,
then press OK.
2. Use the Arrow buttons on the remote to highlight Reset Picture Mode,
then press OK. The TV displays, “Are you sure you want to RESET Picture
Settings to the factory defaults?”
3. Highlight Yes and press OK.
4. Press the EXIT button on the remote.