Vivotek FD7132 - Manual (Page 55)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 55
Application Advanced mode
This section explains how to configure the Network Camera to react in response to particular
situations (event). A typical application is that when a motion is detected, the Network Camera
sends buffered images to a FTP server or e-mail address as notifications.
Event Settings
In the Event Settings column, click Add to open the Event Settings page. In this page, you can
arrange three elements -- Trigger, Schedule and Action to plot an event. A total of 3 event settings can be
configured.
ex. Motion detection,
Periodically, Digital input,
System reboot
Event Trigger
ex. Snapshot, video clips,
system log, digital output ex. Email, FTP, HTTP server,
network storage,
CF card
Media
(what to send)
Server
(where to send)
Action
(what to do)
In the illustation on the right side, an event
can be triggered by many sources, such
as motion detection or external digital input
devices. When an event is triggered, you can
specify what kind of action will be performed.
You can configure the Network Camera
to send snapshots or videos to your email
address or FTP site.