VTech ip8301 - Manual (Page 85)

85
Battery
After the battery is fully charged, you can expect the following performance:
Operation Operating time
While in use (talking) 2 hours
While not in use (standby*) 96 hours (4 days)
*Handset is off the telephone base but not in use
The battery needs charging when:
• A new battery is installed in the handset.
• The telephone beeps twice when taken off the telephone base.
• Battery indicator on the handset display is flashing.
CAUTION:
To reduce the risk of fire or injury to persons, read and follow these instructions:
1. Use only the battery (ies) provided or their equivalent. Do not dispose of the battery (ies) in a fire. They may
explode. Check with local waste management codes for special disposal instructions.
2. Do not open or mutilate the battery (ies). Released electrolyte is corrosive and may cause burns or injury to
the eyes or skin. The electrolyte may be toxic if swallowed.
3. Exercise care in handling battery (ies) in order not to create a short circuit with conductive materials such as
rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns.
4. Charge the battery (ies) provided with or identified for use with this product only in accordance with the
instructions and limitations specified in this manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
NOTE: To purchase a new battery pack, visit www.vtechphones.com or call VTech Communications, Inc.
at 1 (800) 595-9511.
B
a
tt
e
r
y