Velodyne Acoustics SC-600D - Manual (Page 19)

16 w w w . v e l o d y n e . c o m
SC-600D Amplifier User’s Manual
Specifications SC-600 IW (In-Wall) SC-600 IF/IC (In-Floor/In-Ceiling)
Woofer: Two 6.5" active drivers
Two 12.5" x 3" passive radiators 12" (9.7" piston diameter) subwoofer
Frequency Response:
Overall (+/-3 dB)
37-120Hz
23-250 Hz, 34-180 Hz
25-120Hz
15-200 Hz, 24.9-120 Hz
Harmonic Distortion: <5% (typical) <5% (typical)
Magnet Structure: 56 oz.
(3.5 lbs.)
Voice Coil: 2” 4 layer copper coil 2.5" 4 layer copper coil
Dimensions (H/W/D):
(inc. feet & grille)
18.6" x 16.5" x 4.3"
(47.2 x 42 x 11 cm)
**excludes grilles, mounting tabs, etc.
9" x 14" x 32"
(23 x 35.6 x 81.3 cm)
**Allow 1-2 extra inches in depth for wire
Cabinet: Passive radiator design Slotted bass reflex enclosure
Warranty:
(North America)
22 lbs. (9 Kg) 40 lbs. (18 Kg)
Specifications SC-600D Subwoofer Amplifier
Amplifier:
(Class D)
400 watts Dynamic
200 watts RMS Power
High Pass Crossover: 80Hz (6 dB/octave)
Low Pass Crossover: 30Hz-160Hz, Defeatable,
24 dB/octave slope
Inputs: Line and Speaker Level
Outputs: Line-level throughput, speaker level:
80 Hz up (subwoofer out)
Phase: 0°, 90°, 180°, 270°
Dimensions (H/W/D):
(inc. feet & grille)
3.6" x 17" x 13"
(9 x 43.3 x 33 cm)
**Allow two extra inches in depth for wire
connectors and power cable.
**Includes feet. Feet can be removed for
rack mount use. Unit is approximately
“two rack units” high.
Warranty:
(North America)
Shipping Weight:
(approx.)
17 lbs. (7.7 Kg)
The following subwoofers are designed to work with the SC-600D amplifier:
Shipping Weight:
(approx.)
64 oz (4 lbs) each
active / 128 oz (8 lbs) total
Three years (electronics - parts and labor)
Five years (drivers - parts and labor) Five years (drivers - parts and labor)
S p e c i f i c a t i o n s