Velodyne Acoustics SC-600D - Manual (Page 2)

i w w w . v e l o d y n e . c o m
SC-600D Amplifier User’s Manual
C a u t i o n !
Caution
To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying
the subwoofer.
1. Read Instructions — All safety and operating instructions should be read before the product is operated.
2. Retain Instructions — The safety and operating instructions should be retained for future reference.
3. Heed Warnings — All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions — All operating and use instructions should be followed.
5. Water and Moisture — The product should not be used near water — for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near
a swimming pool or the like.
6. Carts and Stands — The product should be used only with a cart or stand recommended by the manufacturer. If a cart is used, use caution when moving the
cart/product to avoid injury from tip-over.
7. Wall or Ceiling Mounting — The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
8. Ventilation — The product should be situated so that its location or position does not interfere with its proper ventilation. For example, the product should not be
situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings. The ventilation shall not be impeded by covering the ventilation openings with items such as newspapers,
tablecloths, curtains, etc.
9. Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
10. Flame — Keep the product away from open flame sources.
11. Power Sources — The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product.
12. Grounding or Polarization — This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
(A grounding type plug has two blades and a third grounding prong.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
13. Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the product.
14. Cleaning — The product should be cleaned only as recommended by the manufacturer.
15. Nonuse Periods — The power cord of the product should be unplugged from the outlet when left unused for a long period of time.
16. Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled onto the enclosure.
17. Damage Requiring Service — The product should be serviced by qualified service personnel when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen or liquid has been spilled into the product.
c. The product has been exposed to rain or moisture.
d. The product does not appear to operate normally or exhibits a marked change in performance.
e. The product has been dropped or damaged.
18. Servicing — The user should not attempt to service the product beyond what is described in the operating instructions. Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been damaged in any way, such as a power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
19. Lightning — For added protection for the product during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet.
20. Overloading — Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock.
21. Attachments — Only use attachments and accessories specified by the manufacturer.
22. Voltage — Insure that the subwoofer is only connected to the rated source voltage. Do not connect the 120-volt version to 230-volts or vice-versa. This will result
in damage to the subwoofer and possible injury to the user.
23. Climates — This product can be used in tropical or moderate climates.
CAutION: To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.
WARNING: To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.