Venture Products 7000 series - Manual (Page 10)

HM & HP SERIES FINISH MOWERS
All Ventrac finish mowers (HM, HP, LM) feature single
lever height adjustment, easy flip-up deck design, and
rear roller for maximum lawn striping. The HP offset
mower shifts the mowing deck 6.5” to the left for a
shorter cutting radius and increased reach for mowing
around ponds or ditches.
4000 SERIES HM602 HM722 HP722
Width of cut 60” 72” 72”
Cutting height 1.125 - 4.75” 1.125 - 4.75” 1.125 - 4.75”
Length
52” 58” 58”
Weight 385 lbs. 450 lbs. 450 lbs.
4000 7000 series
LM SERIES FINISH MOWERS
3000 SERIES LM440 LM520 LM600
Width of cut 44” 52” 60”
Cutting height 1.5 - 3.75” 1.5 - 3.75” 1.5 - 3.75”
Length 45” 45” 58”
Weight 220 lbs. 273 lbs. 310 lbs.
3000 series
Easy height adjustment.
POWER RAKE
KP540
The Power Rake pulverizes, levels, grades and prepares
seed beds with 72 replaceable carbide tips. The
rotor is both driven and angled hydraulically.
Rotation can be changed from the
operator seat.
Overall height 34”
Overall width 62”
Overall length 82”
Rotor width 54”
Height adjustment .125” increments
Height adjustment range 3.5”
Weight 536 lbs.
4000 7000 series
SLIP SCOOPS
Ventrac Slip Scoops are a
must-have attachment allowing
you to dig, level,
and move a variety
of materials.
HE300 HE480
Overall width 36” 52.5”
Working width 30” 48”
Height 15” 16”
Length 34” 34”
Weight 111 lbs. 175 lbs.
Capacity 3.6 f 3 6 f 3
3000 4000 7000 series
SNOW BLOWER
KX522
With a serrated auger, the KX and LX snow blowers
cut into light or hard-packed snow with ease. Chute is
rotated hydraulically left or right 220º on the KX and
180º on the LX.
Optional: A 12V actuator allows the operator to change
the height of throw from the operator seat. A deep snow
auger is also optional on the KX522.
Width 52”
Height 56.5”
Depth 43.75”
Cutting height 26.5”
Cutting width 48”
Blowing distance Up to 40’
Chute rotation 220º
Weight 475 lbs.
4000 7000 series
SNOW BLOWER
LX420
Width (cutting & overall) 42”
Height 52.5”
Length 43”
Throwing distance Up to 40’
Chute rotation 180º
Weight 374 lbs.
3000 series
STUMP GRINDER
KC180
The KC180 Stump Grinder features 18 replaceable
carbide cutting teeth for large or small stump removal.
Standard front mounted mirror allows the operator to
see the stump easily while being fully protected from
debris.
Overall height 19”
Overall width 25”
Overall length 35”
Cutterhead width 3.5”
Overall cutterhead diameter 18”
Cutterhead speed 900 rpm*
Cutting depth below ground level 6”
Weight 171 lbs.
*Engine speed 3600 rpm
STUMP GRINDER
LC150
The LC150 Stump Grinder features 12 replaceable
carbide cutting teeth. An
adjustable blade hydraulically
lowers for use as a depth,
jackstand and to fill in
stump holes.
Overall height 19.5”
Overall width 21”
Overall length 40”
Cutterhead width 3.5”
Rotor tip speed 2,475 ft/min.*
Rotor rpm 620 rpm*
Cutting depth below ground level 6”
Weight 200 lbs.
*Engine speed 3200 rpm
SOD CUTTER
EC240
The Sod Cutter cuts a 24”
wide strip of sod at a user-
adjustable depth.
Cutting width 24”
Height 11.5”
Length 23.5”
Cutting Depth 0 to 2.5”
Weight 41 lbs.
4000 series
Standard mirror on KC180
TERRA RAKES
The Terra Rake is designed to perform a variety of
landscaping jobs. Features include: Hydraulic angling
and gauge wheels that can be mounted front, rear or
removed.
Optional: Hydraulic height adjustment
link (shown), 10” wing extensions.
KR502 KR702
Overall width 52” 70”
Overall width w/extensions 72” 90”
Height 29.5” 29.5”
Length 52” 52”
Weight 242 lbs. 325 lbs.
3000 4000 7000 series
TILLER
KL480
The Ventrac Tiller is designed for easy preparation
of gardens and yards. This power-driven front-end
attachment allows the operator to easily monitor the
tiller’s performance. Skid shoe adjustments facilitate
cutting depth. Twenty-four high carbon
tines are durable and are
sequentially spaced to
maximize performance.
Overall width 53”
Working width 48”
Length 41”
Height 22”
Weight 345 lbs.
4000 series
TOUGH CUT MOWER
HQ680
The Ventrac Tough Cut Mower is designed for mowing
high grass, thick weeds, and heavy brush. Three heavy-
duty blades counter-rotate to cut and drop materials
evenly without windrowing. Tilt-up deck provides easy
access to the blades.
Optional: Adjustable Swivel
wheels for a more controlled
height of cut.
Working width 68”
Cutting heights 3”, 3.625”, 4.25”
Length 45”
Height 15”
Weight 354 lbs.
4000 7000 series
TRENCHER
KY400
The Ventrac Trencher is capable of trenching up to 40
inches deep with a 5.5 inch-wide cut. Depth indicator
allows operator to gauge depth of cut from the operator
seat. Standard features include: Self-adjusting crumb
scraper and combo
terminator/cup chain with
replaceable carbide teeth.
Overall height 27”
Overall width 40”
Overall length 74.5”
Trenching width 5.5”
Trenching depth 40”
Weight 493 lbs.
4000 7000 series
TURBINE BLOWER
ET200
The Ventrac Turbine Blower’s front nozzle
hydraulically rotates 360º continuously
on a vertical plane. The front
guard protects the nozzle
while doubling as a deflector
for blowing forward.
Length 69”
Width 27”
Height 34”
Weight 256 lbs.
MPH out of nozzle 175 mph*
MPH out front of deflector 110mph*
Volume 10,000 cfm*
*Engine speed 3650 rpm
V-BLADE
KV550
The V-Blade is ideal for sidewalk snow
removal. Both wings can be independently
angled hydraulically forward or
back for greater control.
Optional: Wing extensions,
top deflection flap,
and
polyurethane
cutting edge.
Length 31”
Width straight 55”
Width in forward “V” 48.5”
Width in backward “V” 48”
Height 21”
Weight 240 lbs.
Wing angle 30º each
3000 4000 7000 series
VERSA-LOADER
KH500
Discover the versatility and ease of the Ventrac
Versa-Loader (shown with standard bucket). Drive up
and attach in minutes
without tools or
heavy lifting. Once
connected, choose
the
standard
bucket or six other optional
attachments which also feature
Ventrac’s Minute Mount system
to get the job done.
Overall height on tractor 67”
Overall width 41.5”
Overall length w/standard bucket 75”
Overall length - tractor, loader & std. bucket 111”
Width of standard bucket 48”
Capacity of standard bucket (struck) 5 f 3
Weight w/o tools 508 lbs.
Lift capacity including tool 500 lbs.
Lift height (at pivot points) 77”
Oil tank capacity 6 gal.
Gallon/min. @ 3600 rpm 9.5 gpm
4000 series (Loader is not compatible with the Cab)
MULCH BUCKET
9 cu. ft.
POST HOLE DIGGER
Fast drive motor
BOOM LIFT
TINE FORKS
TREE AUGER
Slow drive motor
PALLET FORKS
LOADER ATTACHMENTS
3000 series
4000 7000 series
4000 7000 series