Venture Products 7000 series - Manual (Page 9)

Weight 163 lbs. 203 lbs. 225 lbs.
Attachments
M I N U T E M O U N T / 3 - N - 1
All Ventrac attachments mount in about a minute or less.
Ventrac’s Minute Mount System is the ultimate
example of practical engineering put to good use.
Simply drive up to the Ventrac attachment of
choice:
1. Lock onto the holding pins
2. Insert the coupler connections* and/or...
3. Install the drive belt*
4. Engage the belt tensioner*
And you’re ready to go! *As required by attachment
Rear Attachments
Ventrac 4000 series tractors can be equipped with a Category One 3-point hitch. With the
3-N-1 adapter mounted to the optional Category One 3-point hitch, non-powered attachments
can be operated from behind the tractor alone or simultaneously with the front.
Versatility by
Design just got better!
AERATOR
EB480
The Ventrac Aerator offers the exact tools to address your
turf grass conditions. Choose between core or open spoon
tines. The tines are replaced either individually or by quickly
changing the entire
mounting heads.
Overall
width
54”
Overall height
27”
Overall length 27”
Working width 48”
Aeration density 6 holes/f 2
Weight 217 lbs.
AERA-VATOR
EA600
The AERA-vator is designed to fracture the soil beneath
the sod without destroying the turf on the surface. This
means that turf is ready for use immediately after treatment.
Penetrating the soil with no slicing or cutting action,
preserves the delicate turf grass roots and stimulates
future growth.
Optional: Seed-box (shown) allows
for over-seeding and
aerating simultaneously.
Overall width 66”
Overall height 22”
Overall length 34”
Working width 60”
Tines 96 (0.5625 x 3.5”)
Weight 350 lbs.
Side-to-side tine travel 1.25”
Vibrating depth 3.75”
Tine vibration frequency 3200 rpm
=est. 800 cyc/min
Aeration density 8 holes/f 2
4000 7000 series
Attachments with this symbol can also be
mounted to the rear using Ventrac’s optional
3-point hitch and 3-n-1 adapter.
1 2 3 4
BLADES
The Dozer Blade is hydraulically angled left and right.
Adjustable skid shoes, removable locking pin, and
reversible cutting edge are standard.
Optional: Polyurethane cutting edge and hard-
ened cutting edge.
KD480 KD600 KD720
Width 48” 60” 72”
Height 22” 22” 22”
Angle (right or left) 30º 30º 30º
Weight 163 lbs. 203 lbs. 225 lbs.
3000 4000 7000 series
BLOWER
KA160
The KA160 Power Blower for the 4000 and 7000 series
tractors rotates 180º horizontally left and right with a
standard hydraulic motor controlled
from the operator seat.
Overall width 32.5”
Overall height 22”
Overall length 36”
Fan 16 blade
Wind speed 180 mph
Volume 4000 cfm
Weight 163 lbs.
Hydraulic motor Standard
4000 7000 series
BLOWER
LA162
The LA162 Blower for the 3000
series tractor can be angled 180º
horizontally left and right with the
standard hydraulic motor.
Overall width 32.5”
Overall height 22”
Overall length 42”
Fan 16 blade
Wind speed 160 mph
Volume 3400 cfm
Weight 145 lbs.
Hydraulic motor Standard
3000 series
BROOM
HB580
The HB580 Broom for the 4000 and 7000 series
tractors is hydraulically driven and can be
angled right or left using the
auxiliary S.D.L.A. lever.
Optional: 12V Actuator allows
the operator to slow or reverse
the rotation of the
bristles from the
operator seat.
Overall width 68”
Overall height 24”
Overall length 54.5”
Broom width 58”
Broom speed 220 rpm*
Weight 382 lbs.
Gauge Wheels Standard
*Engine speed 3200 rpm
BROOM
LB540
The LB540 Broom for the 3000 series tractor is hydrau-
lically angled left or right using the Auxiliary lever.
Optional: Belting curtain and outrigger wheels (inset)
for de-thatching your yard.
Broom width 54”
Overall width 60.5”
Overall height 18.5”
Overall length 46.5”
Broom diameter 16”
Broom speed 300 rpm*
Weight 240 lbs.
Gauge wheels Standard
*Engine speed 3200 rpm
EDGER
ED200
The Edger is designed to edge sidewalks, curbs, cart
paths, etc. The edging disc can be reversed for shaping
garden and flower beds.
Optional: Weights and blower* for removing
edged debris.
Overall width 54-66”
Overall height 27”
Overall length 45”
Weight 182 lbs.
Weight w/blower 222 lbs.
Disc diameter 20”
Cutting depth 6”
3000 4000 7000 series
*Blower attaches only to 4000 and 7000 series
EXCAVATORS
HJ Excavator buckets allow the
operator to excavate, dig, and
haul material. Its innovative flip-
back design allows for forward
or reverse excavating.
HJ300 HJ480
Overall width 36” 53.5”
Working width 30” 48”
Height 13” 13”
Length 34” 34”
Capacity 3.6 ft 3 5 ft 3
Ground clearance 11” 11”
Weight 145 lbs. 189 lbs.
3000 4000 7000 series
FIELD MOWER
LQ450
The LQ450 Field Mower is designed to cut heavy grass
and small brush growth with three different height
settings. Two counter-rotating blades discharge grass
to the center rear.
Optional: Tree Shield Kit with
branch lifters and wheel cov-
ers for tree farms (rear weights
recommended).
Cutting width 44.5”
Cutting height 2.25” / 3.5” / 4.75”
Height 16”
Length 55”
Weight 243 lbs.
3000 series
GENERATOR
HG150
The Ventrac Generator is
great for mobile power or
as a standby unit.
Receptacles include: (4)
120v, 20A receptacles;
(1) 120v, 30A Twistlock,
(1) 240v, 30A Twistlock,
(1) 240v, 50A Range re-
ceptacle.
Maximum watts 15,000
Continuous watts 12,500
Voltage 120/240
Amperage 79.2/39.6
Hertz 60
Phase 1
Req. constant shaft speed 3,000 rpm
Net weight 196 lbs.
4000 7000 series
4000 7000 series
3000 series
3000 4000 7000 series