VDO Dayton CCD Backing Up Camera RV 5100 - Manual (Page 4)

General
The RV 5100 is a black& white CCD backing up camera designed for use with VDO and
VDO Dayton Multimedia Systems.
Features:
– no extra supply voltage needed (12 V power supply by Multimedia System)
– automatic switch-on when you shift to the reverse gear (if signal is connected).
– high resolution CCD Image Sensor
– automatic aperture control for optimum adaption to lighting conditions
– aperture angle: 130° diagonal
– waterproof die-cast camera housing
– high operating temperature range
Safety precautions
ATTENTION:
A
Installation may only be carried out by trained specialists! Observe all quality
standards of the automobile industry!
A
Fire hazard! When drilling pay attention to the location of cable harnesses, tank and
fuel pipes! Never drill into car parts which are load-bearing or are important for safety
reasons!
A
Consult with your authorized car dealer if installation requires the drilling of holes or
other modifications of the vehicle.
A
Refer to the owner's manual for details on connecting the other units, then make
connections correctly.
A
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
A
Route and secure all wiring so it cannot touch any moving parts, such as the gear shift,
handbrake and seat rails. Do not route wiring in places that get hot, such as near the heater
outlet.
5
English
VDO Dayton RV 5100
Dienstag, 21. August 2001 16:04:26
Farbprofil: Generic CMYK printer profile - None
Komposit Standardbildschirm