VDO Dayton CCD Backing Up Camera RV 5100 - Manual (Page 6)

6. Connect camera cable as described
in section “Connecting the camera”
on the next page. If required, use
the supplied extension cable.
Connecting the camera
The camera can be connected to your Multimedia System in different ways:
1. Direct connection to the Navigation Computer, ill. 1
For direct connection of the camera to the navigation computer the adaptor cable
MA 1200 (accessory) is required.
☞
Connect the Mini DIN plug of the camera to the Mini DIN socket of the MA 1200.
☞
Activate the “Rear view camera connected” option in the “System Settings –> Video
configuration” menu of the navigation computer.
2. In combination with TV Tuner TV 5100, ill. 2
☞
Connect the Mini DIN plug of the camera to the camera input of the TV 5100.
☞ Connect the yellow lead of the TV 5100 to the reversing signal of the vehicle to
ensure automatic switch over to the camera when backing up.
3. In combination with Multimedia Interface Box MI 5000, ill. 3
☞
Connect the Mini DIN plug of the camera to the camera input of the MI 5000.
☞
Activate the “Multimedia box connected” option in the “System Settings –> Video
configuration” menu of the navigation computer.
4. In combination with TV Tuner TV 5100 and MI Box MI 5000, ill. 3
☞
Connect the Mini DIN plug of the camera to the camera input of the MI 5000.
☞
Activate the “Multimedia box connected” option in the “System Settings –> Video
configuration” menu of the navigation computer.
Checking function and adjusting the camera
1. Switch on ignition.
2. Apply handbrake and select reverse gear.
The picture of the backing up camera has to be shown on the display.
3. Adjust the camera to the desired viewing angle and tighten all screws.
4. Select any forward gear.
The picture of the backing up camera now has to disappear from the display.
7
English
VDO Dayton RV 5100
Dienstag, 21. August 2001 16:04:26
Farbprofil: Generic CMYK printer profile - None
Komposit Standardbildschirm