Vizio VP423 10A - Manual (Page 26)

VIZIO VP423 HDTV10A User Manual
Version 5/16/2008 26
www.VIZIO.com
2.7.1
Optical Output of Audio received
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VP423 HDTV10A. This is active when receiving audio with the
programs being viewed no matter what input is being used.
1. Turn off the power to the PLASMA HDTV and Receiver/Amp.
2. Using an SPDIF cable, connect the cable to the audio input
connector on the Receiver/Amp and connect the other end to
the OPTICAL OUT (white area) audio connectors at the rear of
the PLASMA HDTV.
3. Turn on the power to the PLASMA
HDTV and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the on the remote control to
select the Audio Adjust menu.
6. Press the on the remote control to
select SPEAKERS.
7. Press the on the remote control to
select OFF so that the sound from the PLASMA HDTV will now be routed through your
Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.