Vizio VP423 10A User Manual
Page 31
VIZIO VP423 HDTV10A User Manual
Version 5/16/2008
31
www.VIZIO.com
c. The screen will now change to
show the progress of the
search for Analog (NTSC) and
Digital (ATSC) channels.
Note: DTV digital broadcast is not available in all areas. Refer to
about availability in your area, type of antenna and in which direction to point your antenna. The channel
availability through cable depends upon which channels your cable operator supplies in Clear QAM;
consult your cable operator for more information.
d. When finished, the Complete
screen will be displayed to
inform you that the HDTV has
completed the Initial Setup.
Press the button on the
remote control to exit and
begin watching TV.
5. Select
Input
Source
Select the Input Source for the HDTV by pressing the INPUT button on
the side of the TV or using the Input button on the remote control. Pressing
this button will cycle you through the following options: TV, AV/S-VIDEO,
Component, RGB, HDMI1, HDMI2, HDMI3 and HDMI4.
Now follow the procedure below to display channels from a different
signal (External TV Tuner, VCR, Cable Box or Satellite Receiver) source,
using different inputs at the back of you TV set.