Vivitar ViviCam X014 - Manual (Page 15)

14
conditions.

Note: An initial flash appears to test your lighting conditions. If
flash is needed, a second flash will appear upon taking the photo.
Forced On

The flash is enabled for each photo.

Note: If you use this option in a well lit environment, your photo
may be appear too bright/light (overexposed).
Red Eye

Eliminates the red-eye effect in a photo caused by flash.
Macro Switch
/
Your camera contains a Macro Switch that allows you to manually enable or disable the Macro
mode on your camera. While using the Macro mode, you can capture images at close range (30
~ 45 cm). To turn the Macro mode ON, slide the Macro Switch up on the side of your camera to
the flower icon. When enabled, the Macro mode will allow your camera to focus on an object
that is close to the camera. The icon will appear on the LCD and indicates that the Macro
mode is on.
To turn Macro mode OFF, slide the Macro Switch down on the side of the camera to the mountain
icon. The icon will appear on the LCD. When Macro mode is off, images can be captured
from 1.5m - infinity.
Note:

Using Flash, Face Detect and Smile Capture:
The Macro mode must be turned OFF when you want to use the following features of your
camera: Flash, Face Detect and Smile Capture.
Slide the Macro Switch to the mountain icon . The icon will appear on the LCD display.

Using the Self Portrait feature:
The Macro mode must be turned ON when you would like to take a Self Portrait photo
using the flip screen LCD display.
Slide the Macro Switch up to the flower icon . The icon will appear on the LCD display.