Vivitar ViviCam X014 User Manual
Page 19
18
9)
Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Anti-Shake Menu
The Anti-Shake feature reduces image distortion that can be caused by movement of the camera
while capturing the image.
1)
Press the SET button to open the menus for the current mode.
2)
Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
3)
Press the UP or DOWN direction control buttons to scroll through the menu options.
4)
Press the SET button to select the desired option.
5)
A
selected option icon will appear on the selected item.
6)
Press the LEFT or RIGHT button to select the next menu item.
7)
Press the MODE button to exit the menu and return to your previous mode.
8)
An icon reflecting your selection will display on the LCD screen.
9)
Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Face Detect Menu
The Face Detect feature
when set to „On‟ allows the camera to use a subject‟s face as the basis
for balancing the other colors and focus in the camera
‟s display. This feature is meant to ensure
that the color and focus of your pictures will be consistently sharp and high-quality.
Note: To properly use the Face Detect option, please ensure the following:
Macro mode off - Face Detect will not work if the camera is in Macro mode. Push the Macro
Switch on the side of the camera for the mountain
icon to appear on the LCD.
Anti-Shake - Ensure that the Anti-
Shake option is set to „On‟. The Anti-Shake option is „On‟ by
default when you start using your camera and assists you in properly focusing the image.
Distance from the camera
– The subject‟s face must be no further than 8 to 9 feet (3.5
meters) from the camera and the face must cover at least 20% (1 /
5th) of the picture as „seen‟
on the LCD screen.