VTech IP 811 - Manual (Page 10)

9
Advanced Operation
Headset Operation
Your IP 811 handset is equipped with a 2.5mm headset jack for use with an optional
accessory headset for handsfree conversations. If you choose to use the headset
option, you must obtain an optional accessory headset that is compatible with the IP 811.
To purchase a headset, visit us on the web at www.vtechphones.com or call
VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm headset, locate the headset jack on the IP 811
handset. Connect the plug on the headset cord to the jack (under a small rubber flap) on
the cordless handset. The plug should fit securely. Do not force the connection.
NOTE:
• Whenever a compatible headset is conn-
ected to the cordless handset, the micro-
phone on the handset will be muted. This
is done to limit the effect of background
noise.
• When a compatible headset is connected
to the cordless handset, your speaker-
phone feature will be disabled. To use your
speakerphone feature, simply disconnect
the headset from the handset.
Belt Clip
The IP 811 is also equipped with a detachable
belt clip. Align the pins on the inside edge of the
clip with the notches on the sides of the hand-
set. The belt clip should snap securely into
place. Do not force the connection.
Headset Operation