SINBO SCM 2926 - Manual (Page 17)

- 16 -
MAKING CAPPUCCINO
6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten
to taste and if desired, sprinkle the froth with a little cocoa powder.
7. Press and release the ON/OFF button to the higher position which is the “
OFF
” position
to cut off the power source.
PRODUCING STEAM TO HEAT LIQUIDS OR FROTH MILK SINGLY
The steam wand can be used to froth milk singly or make hot beverages like drinking
chocolate, water or tea.
Method:
1. Remove the detachable tank and fill it with desired water, the water level should not
exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.
2. Then connect the appliance to power supply source.
3. Press down the ON/OFF button to the lower position which is the “
ON
” position, the
red indicator is illuminated.
4. Turning the coffee/steam knob to the “ ” position and waiting for a moment, the
appliance begins to be heated until the green indicator is illuminated, it shows the heating
is finish.
5. Dip the steam wand with plastic sleeve into the liquid to be heated or the intended
froth milk. Turn the coffee/steam knob to the “
” position and start making steam.
6. When the required temperature is reached or the frothing milk is obtained, you can
turn the coffee/steam knob to the “ ” position.
7. Press and release the ON/OFF button to the higher position which is the “
OFF
” position
to cut off the power source.
CLEANING AND MAINTENANCE
1. Cut off power source and let the coffee maker cool down completely before cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank,
drip tray and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water
for cleaning.
3. Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then
you can clean it with cleanser, but at last you must rinse with clear water.
4. Clean all the attachments in the water and dry thoroughly.