Verizon MiFi 2200 - Manual (Page 14)

How to insert and charge the battery
1. Open the battery compartment, located on the bottom of the device.
Insert the battery by lining up the gold contact points on the battery with the gold
contact points in the battery compartment. 2.
3. Once the battery is secure, place the battery cover back on the device until it locks into
place.
4. Connect the microUSB end of the AC wall charger to the microUSB port of the device as
shown.
5. Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge
for at least two hours.
6. You are now ready to install the drivers and VZAccess Manager software. The first time
you use the device, you must use the microUSB cable (included) and have battery
inserted in the MiFi device.
14