Verizon MiFi 2200 - Manual (Page 31)

Port Filtering Screen
ed Applications” is allowed. Other
- Allowe A
the Interne
blocked.
- Custom p
sub-win o
This screen
Thi Applications” button on the Port Filter screen. It
allo need to know
det
• defined it. If enabled, then
traffic f et. If not checked, traffic for
this ap ca
NOTE: These c ct unless the Port Filter is enabled on the Port Filter
screen.
• Application Name - Enter a suitable name for the application.
• Ports - Click this link to display the Port Definition panel, allowing you to define the
ports used by this application. Click "Hide" when finished defining the current
application; click "Apply" when finished defining all applications.
• Port Definition Panel - This panel is displayed when the "Ports" link is clicked, and
allows you to define the ports used by the current application. The current application
is indicated by background shading and panel heading. You can define up to 5 port
ranges for each application, as follows:
• Start Port - Enter the beginning of the range of port numbers used by
outgoing traffic for this application. Use as many rows as necessary to
Available on the Security sub-menu, this screen allows you to configure the Port Filtering
feature. This feature can block outgoing Internet traffic. If enabled, only known
applications, identified by port number, can connect to the Internet.
This screen contains the following settings
-
Enable Port Filter - Use this checkbox to enable or disable the Port Filtering feature as
desired.
• Enabled: Only traffic from the specified “Allow
outgoing (Internet) traffic is blocked.
• Disabled: This feature is disabled, and outgoing traffic is not checked.
d pplications - Enable each application which you wish to be able to access
t while the Port Filter feature is enabled. All other applications will be
A plications - Use this button if you wish to define your own applications. A
d w will open and provide the opportunity to define additional applications.
is described in the following section.
Custom Applications Screen
s screen is reached by the “Custom
ws you to define and enable custom Port Filtering applications. You
ails of the traffic used and generated by the applications you wish to define.
This screen contains the following settings:
Checkbox - Use this to enable an application after you have
rom this application is allowed to access the Intern
pli tion is blocked.
heckboxes have no effe
31