Set contrast, Telephone settings, Using the menu – VTech CS6429-4 EN User Manual
Page 14: Ringer volume (telephone base), Telephone settings using the menu, 10 using the menu
10
Using the menu
In the ringers menu, you can select the ringer tones and adjust the ringer volume
for incoming calls.
In the settings menu, you can change and edit the settings for LCD language,
voicemail indicators, key tone, date and time, home area code and dial mode.
Go to
Answering system settings starting on page 35 for instructions on how
to modify the answering system settings with a system handset shown in the
table below.
Setting
Page
Answer on/off
35
Announcement (play, record and delete)
Call screening
37
Number of rings
37
Remote access code
37
Message alert tone
38
Recording time
38
To enter the handset menu:
Press
MENU/
SELECT
when the handset is not in use.
Press or
until the screen displays the desired feature menu.
Press
MENU
/SELECT to enter that menu.
To return to the previous menu, press
OFF
/CANCEL.
To return to idle mode, press and hold
OFF
/CANCEL.
Ringer volume (telephone base)
Press
/VOL or /VOL on the telephone base to adjust the ringer volume
when the telephone is not in use. When you set the ringer volume to zero, the
base ringer is off and the system announces, “
Base ringer is off.”
1.
2.
3.
•
•
Telephone settings