VTech CS6429-4 EN - Manual (Page 18)

14
Set date and time
The answering system announces the date and time of each message prior to
playing it. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct so that
the day of the week can be calculated from the caller ID information. Before using
the answering system, set the date and time.
Press MENU/
SELECT
when the handset is not in use.
Press or to select >SETTINGS, then press
MENU
/SELECT.
Press or to select >SET DATE/TIME, then press
MENU
/SELECT.
When the month is flashing, press or until the screen
displays the correct month. Press
MENU
/SELECT to confirm.
-OR-
Press the dialing keys ( 0-9) to enter the current month (for
example, if the month is March, you must enter 03).
Repeat Step 4 to set the correct date and year and then
press
MENU
/SELECT to advance to set the time.
Repeat Step 4 until the time is set. Press or to choose
AM or PM, or press 2 for AM or 7 for PM. Press
MENU
/SELECT to save your selection. You hear a confirmation tone.
1.
2.
3.
4.
5.
6.
If the date and time are not set, the system announces, “ Time and date not set,”
before each message plays.
If the date and time are not set, the system announces, “ Time and date not set,”
before each message plays.
Telephone settings
>SET DATE/TIME
HOME AREA CODE
SET DATE
11/20/10
SET TIME
10:30 PM