VTech CS6429-4 EN - Manual (Page 24)

20
Telephone operation
Join a call in progress
You can use up to four system handsets at a time on an outside call. You can
buy additional expansion handsets ( CS6409) for this telephone base. You can
register up to five handsets to the telephone base.
To join a call:
When a handset is on a call, press /
FLASH
or on another handset.
Press OFF/
CANCEL
to exit the call. The call continues until all handsets hang up.
Find handset
Use this feature to find all system handsets.
To start the paging tone:
Press /FIND HANDSET on the telephone base. All idle
handsets ring and their screens show ** PAGING**.
To end the paging tone:
Press / FIND HANDSET again on the telephone base.
Press /FLASH, or any dialing key (0-9,
TONE
or #) on
the handset.
Place the handset in the telephone base or charger.
•
•
•
•
•
•
When you press OFF/
CANCEL
or MUTE/
DELETE
on a handset, the ringer of
that handset is silenced but the paging tone continues on other handsets.
You cannot use the find handset feature while the telephone base is playing
messages or the answering system is being accessed remotely.
•
•
When you press OFF/
CANCEL
or MUTE/
DELETE
on a handset, the ringer of
that handset is silenced but the paging tone continues on other handsets.
You cannot use the find handset feature while the telephone base is playing
messages or the answering system is being accessed remotely.
•
•