VTech CS6429-4 EN - Manual (Page 42)

38
Answering system settings
Message alert tone
When the message alert tone is turned on and you have new message(s), the
telephone base beeps every 10 seconds. Unless you change it, the message
alert tone is set to off.
Press MENU/
SELECT
when the handset is not in use.
Press or to select >ANSWERING SYS, then press
MENU
/SELECT.
Press or to select >ANS SYS SETUP, then press
MENU
/SELECT.
Press or to select >MSG ALERT TONE, then press
MENU
/SELECT.
Press or to choose ON or OFF, then press
MENU
/SELECT to save your
selection. You hear a confirmation tone.
Recording time
You can set the recording time for each incoming message.
Press MENU/
SELECT
when the handset is not in use.
Press or to select >ANSWERING SYS, then press
MENU
/SELECT.
Press or to select >ANS SYS SETUP, then press
MENU
/SELECT.
Press or to select >RECORDING TIME, then press
MENU
/SELECT.
Press or to choose from 3 MINUTES, 2 MINUTES or 1 MINUTE, then
press
MENU
/SELECT to save. You hear a confirmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
The answering system must be turned on for the message alert tone
to function.
Press any key on the telephone base (except
/FIND HANDSET) to
temporarily silence the message alert tone.
•
•
The answering system must be turned on for the message alert tone
to function.
Press any key on the telephone base (except
/FIND HANDSET) to
temporarily silence the message alert tone.
•
•