VTech 2420 - Manual (Page 11)

11
Registration and Operation of the VT2420 Accessory Handset
Your GIGAPHONE system can operate up to 4 Handsets.
The accessory Handset consists of the following:
Setup Of The 2420 Accessory
Handset
1.
Plug the AC power adapter into an
electrical outlet.
2.
Remove the Handset battery cover
by pressing on the indent and sliding
downward.
3.
Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts in
the battery compartment.
4.
Replace the battery cover by sliding
it upward.
5.
Place the Handset in the Charge
Cradle, and allow it to charge for 12
hours. After the initial charge, a
maintenance charge of 8 hours
should be sufficient.
Getting Started
Handset Battery Pack Charger Unit Belt Clip
1
5
3