Vizio L42HDTV10A User Manual
Page 62
CONFIDENTIAL – DO NOT COPY
Page 7-43
File No. SG-0198
WRITE OPERATION STATUS
The device provides several bits to determine the status of a write operation: Q2, Q3, Q5, Q6, Q7,
and RY/BY.Table B and the following subsections describe the functions of these bits. Q7, RY/BY,
and Q6 each offer a method for determining whether a program or erase operation is complete or in
progress. These three bits are discussed first.
Table B. Write Operation Status
Notes:
1.Performing successive read operations from the erase-suspended sector will cause Q2 to toggle.
2.Performing successive read operations from any address will cause Q6 to toggle.
3.Reading the byte/word address being programmed while in the erase-suspend program mode will
indicate logic "1" at the Q2 bit.
However, successive reads from the erase-suspended sector will cause Q2 to toggle.