VTech CS6229-5 - Manual (Page 30)

26
Telephone operation
800-595-9511
1-800-595-9511
595-9511
1-595-9511
800-595-9511
1-800-595-9511
595-9511
1-595-9511
Make a call log entry ready to dial
Although the call log entries received have 10 digits (the area code plus the
seven-digit number), in some areas, you might need to dial only the seven
digits, or 1 plus the seven digits, or 1 plus the area code plus the seven digits.
You can change the number of digits that you dial from the call log and store to
the directory.
While reviewing the call log, press
# repeatedly to show
different dialing options for local and long distance
numbers before dialing or saving the telephone number in
the directory.
Press
1 repeatedly if you need to add or remove 1 in front
of the telephone number before dialing or saving it in the
directory.
When the number is shown in the correct format for dialing,
press /FLASH or to call the number.
Dial a call log entry
When in the call log, press or to browse.
Press
/FLASH or to dial the entry.
Save a call log entry to the directory
When in the call log, press or to browse.
Press
MENU/SELECT to select an entry. The screen
displays EDIT NUMBER.
Use the dialing keys to edit the number.
Press MUTE/REMOVE to backspace and erase a digit.
Press and hold MUTE/REMOVE to erase the entire entry.
Press to move the cursor to the left or to the right.
Press and hold REDIAL/PAUSE to insert a dialing pause (p appears).
Copy a number from the redial list by pressing REDIAL/PAUSE and then
, or REDIAL/PAUSE to select a number. Press MENU/SELECT to
copy the number.
Press MENU/SELECT to move to the name. The screen
displays EDIT NAME.
Use the dialing keys (see page 20) to edit the name
using the same method as explained in step 3 above.
Press # to insert a space.
Press MENU/SELECT to save.
If the entry is already saved in the directory, the handset shows
ALREADY SAVED.
If there is no caller ID information, the handset shows
UNABLE TO SAVE.
1.
2.
1.
2.
3.
•
•
•
•
•
4.
•
5.
•
•
EDIT NUMBER
595-9511_
EDIT NAME
VTECH_