VTech CS6229-5 - Manual (Page 37)

33
Answering system operation
If the memory is full, the answering system answers incoming calls after 10
rings and announces, “Memory is full. Enter the remote access code.”
Window displays Descriptions
0 No messages.
1-99 Total number of old messages recorded.
0-99 (flashing) Total number of messages recorded.
The telephone base might have lost and regained power.
The clock needs to be set.
1-99 & F (alternating) Memory is full with total number of messages recorded.
1-99 (flashing) Current message number during new message playback.
1-99 Current message number during old message playback.
1-8 Telephone base speaker volume level while adjusting.
-- Telephone is answering a call or being accessed remotely.
The answering system is being programmed.
-- (flashing) Telephone is being initialized.
0-6 Telephone base ringer level while adjusting.
Message window displays