Asus P6-M4A3000E - Manual (Page 48)

4-16 Chapter 4: BIOS setup
4.4.3 Onboard Devices Configuration
Onboard Devices Configuration
HDAudio Controller [Enabled]
OnBoard LAN Controller [Enabled]
OnBoard LAN Boot ROM [Disabled]
BIOS SETUP UTILITY
Advanced
Options
Disabled
Enabled
HDAudio.Controller.[Enabled]
Enables or disables the high definition audio controller. Configuration options:
[Enabled] [Disabled
OnBoard LAN Controller [Enabled]
Allows you to enable or disable the onboard LAN controller. Configuration options:
[Enabled] [Disabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller.
This item appears only when the Onboard LAN Controller item is set to
Enabled. Configuration options: [Disabled] [Enabled]
4.4.4. PCIPnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP
devices. The menu includes setting IRQ and DMA channel resources for either
PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA
devices.
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S [No]
NO: lets the BIOS
configure all the
devices in the system.
YES: lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
BIOS SETUP UTILITY
Advanced
Take caution when changing the settings of the PCI PnP menu items. Incorrect
field values can cause the system to malfunction.
Plug.and.Play.O/S.[No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot. Configuration options:
[No] [Yes]