Nat pools chapter 7. address translation 209 – D-Link DFL-2500 User Manual
Page 209
2.
Specify a suitable name for the IP range nat_pool_range
3.
Enter 10.6.13.10-10.16.13.15 in the IP Address textbox
(a network eg 10.6.13.0/24 could be used here - the 0 and 255 addresses will be automatically removed)
4.
Click OK
B. Next create a Stateful NAT Pool object called stateful_natpool :
1.
Go to Objects > NAT Pools > Add > NAT Pool
2.
Now enter:
•
Name: stateful_natpool
•
Pool type: stateful
•
IP Range: nat_pool_range
3.
Select the Proxy ARP tab and add the WAN interface
4.
Click OK
C. Now define the NAT rule in the IP rule set
1.
Go to Rules > IP Rules > Add > IP Rule
2.
Under General enter:
•
Name: Enter a suitable name
•
Action: NAT
3.
Under Address filter enter:
•
Source Interface: int
•
Source Network: int-net
•
Destination Interface: wan
•
Destination Network: all-nets
•
Service: HTTP
4.
Select the Address Translation tab and enter:
•
Check the Use NAT Pool option
•
Select stateful_natpool from the drop-down list
5.
Click OK
7.2. NAT Pools
Chapter 7. Address Translation
209